One perk of having your home security hooked up professionally is that you hardly ever need to worry about it. However, there may be a couple situations when you have to reset your alarms in Stockton. If you’re utilizing the ADT Command interface, your system reset normally takes one or two taps of the touchscreen when you’ve experienced a false alarm, power outage, or battery change.
Consult Your Manual Before Resetting Your Alarm
Here’s a simple yet valuable tip before you try to reset your Stockton home security system, consult your manual first. You don't want to damage your property’s defense as a result of touching the wrong button. Additionally, the process could change if you moved from a numbered keypad to a digital command hub. Keep in mind that if you’re struggling to reset your system, don't hesitate to reach out to the professionals.
Resetting Your Stockton Security System Due To A False Alarm
Usually, a false alarm occurs because of a sensor that was tripped by accident. You are able to use the ADT Command touchscreen or bring up your ADT security app and hit the shield option and enter your security code to switch off the alarms for these instances. You could get a call from your monitoring professionals, but just let them know you experienced a false alarm.
How To Reset Your Alarm After A Power Outage In Stockton
When you lose power because of lighting, strong winds, or other reasons, you could start hearing a repeated, high-pitched beep from your control panel. This signifies that the alarm is using the battery backup. To reset your equipment and halt the steady beeps, you need to disarm/rearm the system.
But please note, if you lose power for prolonged time frame, you could need a complete system reset. Heed the directives in your user’s handbook -- typically by entering your unique passcode and pressing the on/off button twice -- and you should be back in business. You might still hear chirping caused by the secondary power source, as it may not cease until your battery reaches a full charge. Call your home security specialists if you are still having difficulties with your ADT controls 20 hours after power is restored.
When You Need To Reset Your Home Security System After Switching Out A Battery
Occasionally you need to change a battery within one of your home security components. To do this, you want to switch your alarm system to Test Mode so you don't trigger an accidental alarm. After the new battery is put in place, remove the alarm out of "Test Mode" and restore your usual settings. If the system is unable to register the piece of equipment or the battery light remains on, you might have to perform a whole system reset.
Resetting Your Stockton Security System When Adding Or Removing A User
The addition and deletion of personal codes can be done on your ADT Command interface and your ADT smartphone app. You shouldn't require a reset of your alarm following the addition or deletion of users. With that being said, if you find yourself moving to a new house already equipped with an ADT security system, you'll want to contact your residential security experts at (209) 226-4846 to set up a new contract. The installation tech will go on site to switch out components, place additional components (if necessary), and reset the system for you.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Stockton is frustrating if it isn’t equipped with understandable instructions and features. If you would like to get your easy-to-use home security system, contact (209) 226-4846 or complete the form below. We’ll be happy to help customize the ideal security system for your residence.